How To Make Your Shoes Non-Slip For Restaurant

In any restaurant work, you are always on your feet, moving around on potentially slick surfaces. Without non-slip shoes, a fall, an injury, or a lack of confidence can result. But if you’re not ready to go out and spend money on new non-slip shoes (which can get pretty expensive), there are affordable, DIY methods you can use to improve the traction on your current pair of shoes. Read on below to see, How To Make Your Shoes Non-Slip For Restaurant, aiding you to work comfortably and safely.

1. Use Non-Slip Shoe Pads

The fastest and most guaranteed way to turn your shoes into a non-slip shoe pad. Shoe stores also have these adhesive pads that have been made to grip the smooth areas of the floors.

Steps:

But the first step will be cleaning the soles of your shoes with a damp cloth, to remove any dust or grease. The adhesive sticks better.

Dry the shoe completely, then remove the backing of the nonslip pads.

Place pads on the ball and heel of each shoe, pressing down hard enough to make it secure.

Benefits:

Nonslip shoe pads are budget-friendly ways of adding immediate traction, without slowing you down in slippery places such as tile or polished wood floors found in many restaurants.

Putting nonslip shoe pads in the shoes we use in a restaurant environment is a practical, inexpensive way to help make them safer. In other words, this simple addition can have such a big impact on stability and confidence on the job.

2. Apply Puff Paint to the Soles

For those of you who like DIY methods, puff paint is a fantastic and creative way to increase the traction of your shoes. Puff paint is widely used for crafts; nonslip shoes, once dry it has a textured, rubbery finish, which makes it a good choice and use.

Steps:

Use this to clean the area underneath the shoe soles so there’s no oil or grime inside. It guarantees that the paint goes on right. On the sole areas, we brush or apply small dots, lines, or patterns of puff paint to the earth.

Don’t, however, wear the shoes until they are completely dry. Ideally, let the paint dry overnight for some hours.

Benefits:

Provider — Puff paint is flexible and it won’t crack or peel as you walk.

In addition, there are unique patterns you can create that not only increase slip resistance, but they provide a personalized, added look to your shoes.

Affordable and customizable, puff paint is a great way to make shoes slip-resistant and effective on all surfaces, including wet kitchen tiles and polished dining floors.

3. Roughen the Soles with Sandpaper

So one of the best ways of making shoes nonslip is by making the soles texture through sandpaper. Particularly handy for shoes with a nonslip sole (like leather or plastic) because they can make slippery shoes extra slippery super fast when worn on a wet surface.

Steps

The bottom of the shoes can be gently sanded using medium-grit sandpaper (80 – 120 grit). With that in mind, look at where your feet are placing themselves in contact the most like the ball and the heel of each shoe.
Next, take a dry cloth and wipe off any dust, there will be some.

Benefits:

A permanent, effective way to make your shoes more grippy, without using adhesives, is to roughen the soles.

If you want to roll with a crazy discreet solution, without changing the look of your shoes, this is the method for you.

On a smooth surface, you can buff away any grip issues with sandpaper in a matter of a few minutes, a handy way for anyone who’s just starting to learn how to make shoes non-slip for a restaurant.

4. Score the Soles with a Knife

If you want another DIY technique, try scoring the soles of your shoes with a utility knife. If your stored or shoe slip-resistant surfaces are moist or otherwise slick, deep shampooing the tendons within the shoe will lift and create shallow grooves in a crisscross pattern for increased traction on the surface.

Steps:

Clean soles thoroughly and with a sharp utility knife, make shallow diagonal cuts across the sole. Be careful with cutting just too deeply if your shoes are thin.

Score, making a pattern with lines inches apart, and then wipe dust created through scoring away.

Benefits:

Scoring makes tiny grooves for us to grip the floor, which reduces the risk of slipping on wet or greasy surfaces.

This is a long-lasting, perfect shoe traction fitness for shoes with solid, flat soles making it the best method of increasing shoe traction available.

For rubber or plastic shoes, scoring is particularly helpful, allowing you to effectively and long-lasting prevent slipping in a restaurant.

5. Use Traction Spray

Traction spray is a quality product that makes shoes nonslip so that people doing fast-paced work like in restaurants can work on a non-slip surface. It can simply be sprayed on the soles of your shoes for more grip.

Steps:

Clean and dry your shoes’ soles (thoroughly), then spray evenly on the bottoms of each shoe.
Warnings: Usually takes a few minutes to an hour, depending on the brand, let the spray dry completely before wearing the shoes.

Benefits:

Traction spray is a simple-to-use temporary reliable grip.

It’s great for all types of shoes, especially if you need something quick and non-hurtful to prevent slipping.

Traction spray is a fast, easy way to apply slip resistance to your footwear—it’s great for quick changes, or when using on a temporary surface.

FAQs

1. Can any shoes be made non-slip for a restaurant?

These DIY methods will work to make most shoes slip-resistant, yes. But, as you already know, not all methods suit all shoe types, so it’s better to choose according to our provided one.

2. How long do these non-slip methods last?

Each method has a different lifespan. The wear of these surfaces can vary, from a few weeks to multiple weeks, to many months depending on the wear. In high-traffic areas, puff paint may need to be reapplied periodically, sometimes with walls remaining involved longer or longer balance, scoring, or sandpaper roughening may also continue faster.

3. Should I consider buying non-slip shoes instead?

DIY methods sure work well but is investing in purpose-built non-slip shoes for restaurants a good idea? Long-term durability, and comfort, with or without added features such as water resistance.

4. Are non-slip shoe pads removable?

It’s also true: most non-slip shoe pads are easy to remove and won’t harm your shoes. Should this adhesive pad be used for long, it’s best to pick a high-quality adhesive pad so that it will come off without residue if no longer needed.

5. Are there any materials to avoid with these DIY methods?

Also, avoid adhesive sprays and puff paint when those are the materials used in making the shoes. If these shoes are being used on delicate surfaces, you can choose to use nonslip shoe pads or traction sprays.

Conclusion

How to prevent shoes from slipping on a restaurant floor is an important puzzle to tackle if you’re in the food service arena. Here are some adhesive pads, sandpaper, and spray solutions available to help make you safer and more confident in a crowded restaurant environment. DIY is effective but you might also want to splurge on specially made nonslip shoes for restaurant work for performance that will last. These techniques can help you try out and then select the best technique for your needs and have a safer, more stable work life.